Blog
We look forward to working with you,mutual benefit and win-win,create brilliant!
Let's help you
MoreLatest News
High frequency welded pipe machine installation and debugging steps are introduced, come and collect!
Release time:
2022-12-01 09:41
When installing and debugging the high-frequency pipe welding machine, pay special attention to the fact that both hands must leave the head of the high-frequency pipe welding machine to prevent burns. So, high frequency welded pipe machine installation and debugging steps is how? Here we all together to analyze.
1. Upper mold: Install the mold on the high-frequency machine, lay the upper edge material below, pay attention to whether the mold section and mold are in good condition, mold adjustment: after the mold is installed, it must be adjusted to the level and set parameters, pay attention to the same depth on the left and right, not too deep or too shallow) Press high frequency: align the material with the mold, press the presser foot, and double press the power switch.
2. High frequency is high frequency wave. The principle of high frequency welded pipe machine is different from ultrasonic. High frequency machine uses high frequency electromagnetic field to make molecules in the material collide violently and generate high temperature, so as to achieve the purpose of welding. Due to the wide application range of high frequency welded pipe machine, there are high frequency plastic welding machine, high frequency leather plastic welding machine, high frequency folding box machine, high frequency metal welding casting machine, high frequency metal heating machine, etc. High frequency products are more popular, because the high temperature generated by high frequency electromagnetic field is more conducive to product integration.
3. The output power of the tweeter is very high. The cycle rate of the oscillator is 27.12MHz or 40.68MHz, which is in line with the frequency band standard. The dedicated electronic circuits of various control devices can avoid operation errors, weld products as soon as possible, and improve product yield. The working principle of the high-frequency pipe welding machine is that the dielectric material generates molecular polarization through the high-frequency electric field and is arranged along the direction of the electric field. If the direction changes at an extremely fast speed due to the high-frequency electric field, the dielectric material will generate heat due to dielectric loss.
4. High-frequency welded pipe machine specializing in the production of various general high-frequency equipment, four-row manual sliding table welding machine. The high frequency machine is flexible and convenient to operate and can increase output. The high-sensitivity spark protection device prevents mold damage and can be professionally customized according to customer requirements. High frequency machine is suitable for processing the whole roll of products, PVC folding, grid, business card holder and other products can be the whole roll processing. For hard materials, the leveling forming can be completed at one time, the broken bridge saves manpower, improves product accuracy, and the high-sensitivity spark protection device prevents damage to the mold.
5. The automatic frequency tracking function of the high-frequency pipe welding machine is combined with the frequency polarization protection function, so that the ultrasonic plastic welding machine generator is always in a good working frequency. The tuner has a boost circuit and a suppression circuit. In normal welding, the amplitude can reach 1.5-2 times, which improves the instantaneous welding characteristics, automatically reduces the overload amplitude, keeps the overload continuous, and has a good automatic amplitude modulation function.
6. Install the tube. a. Open the lower front cover and the right cover of the body. B. carefully put the high frequency electron tube into the resonant cylinder * from the gap behind the machine, and fix it on the mounting seat with screws after adjusting the direction. c. Install the filament wire on the filament screw of the tube. When tightening the nut, two suitable wrenches must be used to clamp the upper nut and the lower nut at the same time to prevent the ceramic body on the electron tube from breaking and the electron tube from being scrapped. d. Fix the gate copper plate on the gate of the electron tube with screws, and do not loosen it.
7. Install the sliding rail of the push plate and place the push plate. First, fix the slide rail on the corresponding mounting seat of the machine with screws (do not tighten the screws first), then put the push plate on the slide rail (the pulley should block the slide rail), and adjust the slide rail to align the push plate with the support plate to make it move smoothly and flexibly. Then tighten the rail retaining screws.
8. Install the power cord. The power line of the high-frequency welded pipe machine is a 5-core cable, of which the yellow ground wire, the brown ground wire and the other three ground wires (without phase sequence). In order to ensure personal safety, the ground wire must be reliably connected.
High frequency welded pipe machine
Latest News
Contact Us
Tel :+86-514-87736047
Phone :+86-15062802588
E-mail : market@nanyangmill.com
Address : Yangshou industry park,Hanjiang District, Yangzhou City, Jiangsu Province, China
This website already supports IPV4 / IPV6 bidirectional access