Blog
We look forward to working with you,mutual benefit and win-win,create brilliant!
Let's help you
MoreLatest News
Precautions for the operation of high frequency welded pipe machine
Release time:
2023-01-03 15:56
Nowhigh frequency welded pipe machineIn the period of rapid development, the high-end technology used in the equipment has greatly improved the scope of application. In the use of high frequency welded pipe machine need to pay attention to what?
Before starting the high-frequency pipe welding machine, it is necessary to check whether the safety cover and other safety devices of the equipment are complete and intact. Check whether the fixing screws of each part are firm. Before work, it is necessary to check whether the fan in the high frequency controller is running normally and smoothly. Check whether the high-frequency die and auxiliary tools are complete and in good condition. Be sure to start debugging after preheating for 5 minutes, and check the basic performance of the equipment, including high-frequency current, whether the switch is flexible, whether the lubrication parts and other components are working normally, and whether there is abnormal noise. It can be put into production only after confirming safety, and it is strictly forbidden to switch misoperation. Care needs to be taken to ensure that all necessary installation work for the HF welded pipe machine has been completed. Start the cooling water first. Turn on the external power switch, turn on the air switch on the back of the device, and turn on the power switch on the front panel of the high-frequency pipe welding machine. After these are completed, the "heating current adjustment" knob can be adjusted to the desired position.
The high-frequency pipe welding machine needs to adjust the shape of the induction coil to meet the heating requirements of the workpiece. Heating can be started by pressing the "Start" button or the foot switch. At this time, the "working" light flashes, and the "output current display" shows the heating current. Press the STOP key to stop heating. When the high-frequency pipe welding machine is shut down, first turn off the front panel power switch, turn off the external main switch, and then turn off the water. In addition, it should be noted that please do not use the device when the input voltage is too high. The inside of the machine and the induction coil must be cooled with water, and the water source must be kept clean to avoid blocking the cooling pipe and causing overheating and damage to the machine. The temperature of the cooling water of the high-frequency pipe welding machine should not be too high, and it is better to be lower than 45 ℃. Do not use waterproof raw material tape when installing the induction coil to avoid poor contact. Remember not to change the induction coil welding to brazing or silver welding. When induction heating materials with poor magnetic conductivity such as copper and aluminum, the number of induction coils should be increased.
High frequency welded pipe machine
Latest News
Contact Us
Tel :+86-514-87736047
Phone :+86-15062802588
E-mail : market@nanyangmill.com
Address : Yangshou industry park,Hanjiang District, Yangzhou City, Jiangsu Province, China
This website already supports IPV4 / IPV6 bidirectional access