Blog
We look forward to working with you,mutual benefit and win-win,create brilliant!
Let's help you
MoreLatest News
What should be followed in the use specification process of pipe welding machine?
Release time:
2021-01-15 14:42
According to the currentWelded pipe equipmentThe development trend, how to better use of welded pipe equipment is particularly important, today mainly talk about the following points:
1. Do not contact with the mold during operation.
2, we are usingWelded pipe equipmentBefore, first check whether the lubrication points on the unit are completely lubricated.
3, must do a good job of daily maintenance, so that the service life will be long.
pipe welding machineWe should do a good job of rust prevention in both parts and complete machines. First, we should try our best to avoidWelded pipe equipmentKeep it in a damp place. Another is the rust grease, in addition to rust maintenance work we have to strictly.
Operate the welded pipe unit equipment in strict accordance with the formal operation process. Before starting up, add lubricating oil to the machine regularly, at fixed points and quantitatively according to the lubrication chart. The lubricating oil must be clean and free of impurities.
The welded pipe unit regularly replaces the lubricating oil in the bearing, and regularly checks the electrical appliances to eliminate unreliable safety factors. Forpipe welding machineThe V-belt, handle, knob and button shall be checked regularly for damage.
Specific welding process is:
1. After the coil is properly positioned, the left and right taper heads of the uncoiler can be inserted into the steel coil and rotated at the same time. The head is sent into the nip roller, and the upper roller of the nip roller is pressed down, so that the steel coil trolley and the magnetic roller can return to their original positions.
2. In order to enable the spring steel strip to be accurately aligned, the uncoiler can move 150mm axially as a whole before operation. After the uncoiler is started, the strip steel reaches the straightening machine equipped with dust removal device through the pinch roller.
3. The head and tail of the straightened spring steel strip are cut by sliding hydraulic shear (the cut strip head can slide into the waste box immediately, and the cut strip tail can be collected in the special collecting box outside the line by the output device).
Pipe welding machine, pipe welding equipment, high frequency pipe welding equipment, pipe welding equipment manufacturers
Latest News
Contact Us
Tel :+86-514-87736047
Phone :+86-15062802588
E-mail : market@nanyangmill.com
Address : Yangshou industry park,Hanjiang District, Yangzhou City, Jiangsu Province, China
This website already supports IPV4 / IPV6 bidirectional access