Blog
We look forward to working with you,mutual benefit and win-win,create brilliant!
Let's help you
MoreLatest News
Maintenance and Maintenance of High Frequency Welded Pipe Unit
Release time:
2021-06-08 11:28
high frequencyWelded pipe unitIt will always be damaged during normal work. How to properly maintain and prolong its service life in daily life is a matter of concern to everyone. Below we will come to understand it.
In the process of use, strictly follow the operating procedures in the instructions. Before the machine runs, check whether all parts of the machine can work normally and whether there is any fault. Only when the machine parts and various indicators are normal, can we start production, otherwise it will cause the loss of the machine.
Check the high frequencyWelded pipe unitAfter the parts are turned on and run. In the process of mechanical production, we need to ensure that the temperature and production conditions of the machine are stable. If the machine fails, we need to stop production in time and check which parts of the machine fail to avoid greater losses. The main faults include unstable operation of the machine and abnormal noise during operation. If there is any problem, it should be checked in time.
After the machine has been used for a period of time, pay attention to lubricating and cleaning the machine regularly to ensure that the machine is clean. Only in this way can the machine operate normally and be relatively light during use. The aging parts in the machine need to be replaced in time to ensure the normal operation of the machine, even if the machine When not in use, the high-frequency welded pipe unit must be properly kept and cannot be discarded.
Welded pipe unitCommon maintenance methods:
1. Check the high-frequency pipe welding machine on weekdays, check whether the pipeline is normal, and truthfully record the mechanical condition of the solid-state high-frequency pipe welding machine. If it is found that the solid-state high-frequency welded pipe machine has the risk of complications, it should be repaired quickly to avoid affecting the normal use of the following.
2. The parts that need lubrication in the high-frequency welded pipe machine should be lubricated on time. Use special lubricant to prevent the welded pipe from rusting. Galvanizing is a good way to extend the service life of the welding machine. Surface pretreatment is required before galvanized steel pipes. Pretreatment usually includes degreasing (degreasing is to remove oil stains and dirt on the outside of the black pipe and prevent the influence of acid leaching. Caustic soda or alkali can be used to complete daily alkali washing). Water washing, pickling, and then washing, etc.
Although some stains have been cleaned by alkali, pickling and alkali washing are different for dirt. The purpose of pickling is to remove the oxide scale on the mechanical surface of the high-frequency pipe welding machine. The pickling may be carried out at room temperature. Low metal corrosion, low hydrogen absorption, low mixing compatibility with carbon black residues, pickling to form oxides, large depth, easy to clean, and no effect on galvanizing.
Welded pipe unit
Latest News
Contact Us
Tel :+86-514-87736047
Phone :+86-15062802588
E-mail : market@nanyangmill.com
Address : Yangshou industry park,Hanjiang District, Yangzhou City, Jiangsu Province, China
This website already supports IPV4 / IPV6 bidirectional access