Blog
We look forward to working with you,mutual benefit and win-win,create brilliant!
Let's help you
MoreLatest News
Daily application of welded pipe unit matters needing attention
Release time:
2022-04-18 15:09
Welded pipe unitIt will always be damaged in normal work. How to properly maintain it in daily life to extend its service life is a problem that everyone cares about. Here to explain for everyone.
In the process of using the welded pipe unit, the operation process in the manual should be strictly followed. Before the machine runs, we should check whether all parts of the machine can work normally and whether there is any fault. Only when the parts and indicators of the machine are normal can the production be started, otherwise it will cause the loss of the machine.
Check the welded pipe unit parts before starting the machine. In the process of mechanical production, it is necessary to ensure the stability of the temperature and production conditions of the machine. If the machine fails, it is necessary to stop production in time and check which parts of the machine have failed to avoid greater losses. The main faults include the unstable operation of the machine and whether there is abnormal noise during operation. If there is a problem, it should be checked in time.
After the machine has been used for a period of time, pay attention to regular lubrication and cleaning of the machine to ensure its cleanliness. Only in this way can the machine operate normally and be lighter in use. The aging parts in the machine need to be replaced in time to ensure the normal operation of the machine. In addition, when the machine is not in use, the welded pipe unit should be properly kept and not discarded at will.
Common maintenance methods:
1. Do a good job in checking the welded pipe unit on weekdays, check whether the pipeline is normal, and truthfully record the mechanical condition of the solid-state welded pipe machine. If it is found that the solid-state pipe welding machine has future problems, it should be repaired in time to avoid affecting the normal use of the following.
2. The parts of the welded pipe unit that need to be lubricated should be lubricated on schedule, and lubricated with special lubricants to prevent the welded pipe from rusting. Galvanizing is a good way to extend the service life of the welding machine. Galvanized steel pipes need surface pretreatment before galvanizing, which usually includes degreasing (degreasing is to clean the oil stains and dirt on the outside of the black pipe to prevent the effect of dipping and pickling, and daily alkali washing can be done by burning or alkali), Water washing, pickling, water washing, etc.
3. Although alkaline washing cleans up some stains, pickling and alkaline washing are not the same for dirt. The purpose of pickling is to cover the mechanical surface of the welding machine with a layer of iron oxide scale. Pickling can be carried out at room temperature, with low corrosion to metals, low hydrogen absorption, low miscibility to carbon black residue, no oxide formation in pickling, large depth, easy cleaning, and no effect on galvanizing.
Welded pipe unit
Latest News
Contact Us
Tel :+86-514-87736047
Phone :+86-15062802588
E-mail : market@nanyangmill.com
Address : Yangshou industry park,Hanjiang District, Yangzhou City, Jiangsu Province, China
This website already supports IPV4 / IPV6 bidirectional access