Blog
We look forward to working with you,mutual benefit and win-win,create brilliant!
Let's help you
MoreLatest News
Maintenance and Maintenance of High Frequency Welded Pipe Unit
Release time:
2022-04-13 16:52
high frequencyWelded pipe unitIt will always be damaged in normal work. How to properly maintain it in daily life to extend its service life is a problem that everyone cares about. Here to explain for everyone.
During use, the operating procedures in the instructions should be strictly followed. Before the machine is running, it should be checked whether the various parts of the machine can work normally and whether there is a fault. Only when the parts and indicators of the machine are normal can the production be started, otherwise it will cause the loss of the machine.
After checking the components of the high-frequency welded pipe unit, it will start up and run. In the process of mechanical production, it is necessary to ensure the stability of the temperature and production conditions of the machine. If the machine fails, it is necessary to stop production in time and check which parts of the machine are malfunctioning to avoid greater losses. The main faults include unstable operation of the machine and whether there is abnormal noise during operation. If there is a problem, it should be checked in time.
After the machine has been used for a period of time, pay attention to regular lubrication and cleaning of the machine to ensure its cleanliness. Only in this way can the machine operate normally and it will be lighter in use. The aging parts in the machine need to be replaced in time to ensure the normal operation of the machine. In addition, when the machine is not in use, it is also necessary to take good care of the high-frequency welded pipe unit and do not discard it at will.
Common maintenance methods:
1. On weekdays, check the high-frequency pipe welding machine, check whether the pipeline is normal, and truthfully record the mechanical condition of the solid-state high-frequency pipe welding machine. If it is found that the solid-state high-frequency welded pipe machine has trouble, it should be repaired in time to avoid affecting the normal use of the following.
2. The parts of the high-frequency welded pipe machine that need to be lubricated should be lubricated on schedule, and special lubricants should be used to prevent the welded pipe from rusting. Galvanizing is a good way to extend the service life of welded pipes. The surface pretreatment of steel pipe is required before galvanizing, usually including degreasing (degreasing is to clean the oil stains and dirt on the outside of the black pipe, in order to prevent the effect of dipping and pickling, and daily alkali washing can be carried out by burning or alkali), water washing, acid washing, water washing, etc.
3. Although some stains are washed with alkali, pickling and alkali washing are different in dirt. The purpose of pickling is to cover the mechanical surface of the high-frequency pipe welding machine with a layer of iron oxide scale. Pickling can be carried out at room temperature, with little corrosion to metals and less hydrogen absorption, because the confusion and compatibility of carbon black residues are small. Pickling forms oxides, which are deep and easy to clean, and have no effect on galvanizing.
Welded pipe unit
Latest News
Contact Us
Tel :+86-514-87736047
Phone :+86-15062802588
E-mail : market@nanyangmill.com
Address : Yangshou industry park,Hanjiang District, Yangzhou City, Jiangsu Province, China
This website already supports IPV4 / IPV6 bidirectional access