Blog
We look forward to working with you,mutual benefit and win-win,create brilliant!
Let's help you
MoreLatest News
What are the matters needing attention in daily use of welded pipe unit
Release time:
2022-06-15 09:24
Pipe welding machines are increasingly used in the construction industry, and some large factories have introduced pipe welding machines: for example, square pipe welding machines and pipe welding machines with different functions. Now welded pipe equipment has become one of the indispensable equipment of welding plant. In the application, the main use of high-frequencyWelded pipe unit. High frequency welded pipe unit in normal use, will be subject to varying degrees of injury. The daily maintenance of welded pipe units has become a topic of concern for people who use welded pipe equipment. Here are some relevant knowledge:
1. In the daily use of the welded pipe unit, the operation should be strictly in accordance with the procedures in the manual.
2. Before using the welded pipe unit, be sure to check whether the parts of the machine are working normally and whether any faults are found. Only when the machine parts reach the normal index, the machine can run and put into production. Otherwise, it is easy to cause damage to the machine.
3. Start production after checking. In the production process of the machine, ensure that the production environment of the machine runs stably and meets the normal temperature conditions. When there is a problem with the welded pipe unit, production must be stopped, and the faulty parts must be inspected and repaired to avoid greater losses. The fault mainly includes the mechanical operation is not stable, the sound is not good and so on. If problems are found, take timely measures.
4. After the welded pipe unit is used to a certain extent, the machine should be lubricated and cleaned regularly to ensure that the machine meets normal standards, so that the machine can operate normally and become easy to use. The aging parts should be removed and replaced in time to ensure the normal operation of the machine. When the machine is not used for placement and handling, good storage measures should also be taken and should not be placed at will.
What are the adjustment methods for the bad conditions of the welded pipe unit? There are many bad conditions for the welded pipe unit that needs to be adjusted, such as scratches, drill pipes, straightening adjustments, etc. When scratches occur, they mainly occur on both sides of the transverse and longitudinal axis of the pipe section, mainly caused by the hole edge of the flat roller and the vertical roller. At this time, we need to check whether the roll is displaced, whether the bearing is damaged, and whether the machine parameters are adjusted. Although this is a man-made phenomenon that should not happen, it cannot be avoided in reality.
Drill pipe problems with welded pipe units are usually rare, and the probability of this happening is relatively low. If this happens, it may be because of the poor rigidity of the thin-walled tube. If the tube wall is very thin, it is easy to be bitten by the roller. Usually, in this case, it is necessary to check whether the bearing is damaged and whether the hole center is correct.
Welded pipe unit
Latest News
Contact Us
Tel :+86-514-87736047
Phone :+86-15062802588
E-mail : market@nanyangmill.com
Address : Yangshou industry park,Hanjiang District, Yangzhou City, Jiangsu Province, China
This website already supports IPV4 / IPV6 bidirectional access