Blog
We look forward to working with you,mutual benefit and win-win,create brilliant!
Let's help you
MoreLatest News
Maintenance and Maintenance of High Frequency Welded Pipe Unit
Release time:
2021-08-05 16:38
high frequencyWelded pipe unitIt will always be damaged during normal operation. How to properly maintain and prolong its service life in daily life is a matter of concern to everyone. Here to explain for everyone.
In the process of use, strictly follow the operating procedures in the instructions. Before running the machine, check whether all parts of the machine can work normally and whether there is any fault. Only when the machine parts and various indicators are normal can we start production, otherwise it will cause the loss of the machine.
After checking the high frequencyWelded pipe unitIn the production process of the machine, it is necessary to ensure the stability of the temperature and production conditions of the machine. If the machine fails, we need to stop production in time and check which parts of the machine fail to avoid greater losses. The main faults include unstable operation of the machine and abnormal noise during operation. If there is any problem, it should be checked in time.
After the machine has been used for a period of time, pay attention to lubricating and cleaning the machine regularly to ensure that the machine is clean. Only in this way can the machine operate normally and be lighter when used. The aging parts in the machine need to be replaced in time to ensure the normal operation of the machine. Even when the machine is not in use, the high-frequency welded pipe unit must be properly kept and cannot be discarded at will.
high frequencyWelded pipe unitCommon maintenance methods:
1. Check the high-frequency pipe welding machine on weekdays, check whether the pipeline is normal, and record the mechanical condition of the solid-state high-pressure high-frequency pipe welding machine as it is. If it is found that the solid-state high-frequency welding machine has the risk of problems in the future, it should be repaired quickly so as not to affect the normal use of the following.
2. The parts that need lubrication in the high-frequency welded pipe machine should be lubricated on time. Use special lubricant to prevent the welded pipe from rusting. Galvanizing is a good way to prolong the service life of welding machines. Before galvanizing steel pipes, surface pretreatment is required. Pretreatment usually includes degreasing (degreasing is to clean oil stains and dirt outside the black pipe to prevent the influence of acid immersion, and caustic soda or alkali can be used to complete daily alkali washing) water washing, acid washing, water washing, etc.
Although some stains have been cleaned by alkali, pickling and alkali washing are different for dirt. The purpose of pickling is to remove the oxide scale on the mechanical surface of the high-frequency pipe welding machine, and pickling can be carried out at room temperature. It has low metal corrosion, low hydrogen absorption, low mixing compatibility with carbon black residue, pickling to form oxides, large depth, easy cleaning, and no effect on galvanizing.
Welded pipe unit
Latest News
Contact Us
Tel :+86-514-87736047
Phone :+86-15062802588
E-mail : market@nanyangmill.com
Address : Yangshou industry park,Hanjiang District, Yangzhou City, Jiangsu Province, China
This website already supports IPV4 / IPV6 bidirectional access