Blog
We look forward to working with you,mutual benefit and win-win,create brilliant!
Let's help you
MoreLatest News
Maintenance and Maintenance of High Frequency Welded Pipe Unit
Release time:
2021-08-19 14:14
high frequency welded pipe machineIn normal work, the group will always be damaged. How to properly maintain it in daily life so as to prolong its service life is a matter of concern to everyone. Here is an explanation for everyone.
In the process of use, we must strictly follow the operating procedures in the instructions. Before the mechanical operation, we must check whether the various parts of the machine can work normally and whether there is any failure. Only when the parts and indicators of the machine are normal, we Can start and put into production, otherwise it will cause mechanical loss.
After checking the components of the high-frequency welded pipe unit, it is necessary to ensure the stability of the temperature and production conditions of the machine during the mechanical production process. If the machine fails, we need to stop the production in time and check which parts of the machine fail so as not to cause greater losses. The main failures include unstable mechanical operation and whether there is abnormal noise during operation, problems should be checked in time.
After the machine is used for a period of time, pay attention to the regular lubrication and cleaning of the machine to ensure that it is clean. Only in this way can the machine run normally, and it is relatively light during use. The aging parts in the machine need to be replaced in time to ensure the normal operation of the machine. Keep it well when the machine is not in usehigh frequency welded pipe machinegroup, cannot be discarded arbitrarily.
Common maintenance methods:
1. On weekdays, check the high-frequency pipe welding machine, check whether the pipeline is normal, and truthfully record the mechanical condition of the solid-state high-frequency pipe welding machine. If it is found that the solid-state high-frequency pipe welding machine has subsequent risks, it should be quickly overhauled so as not to affect the normal use of the following.
2.high frequency welded pipe machineParts that need lubrication should be lubricated on schedule, lubricated with special lubricant to prevent welded pipes from rusting. Galvanizing is a good method to prolong the service life of welding machines. Surface pretreatment is required before galvanizing steel pipes. Pretreatment usually includes degreasing (degreasing is to clean oil stains and dirt on the outside of black pipes, in order to prevent the effect of dipping and pickling, and daily alkaline washing can be completed through combustion or alkali) water washing, acid washing, etc.
3. Although alkali washing has cleaned up some stains, pickling and alkali washing are different for dirt. The purpose of pickling is to remove iron oxide scale on the mechanical surface of high-frequency pipe welding machine. Pickling can be carried out at normal temperature, with less metal corrosion and less hydrogen absorption. It is less confusing and compatible with carbon black residue. Pickling forms oxides, has large deep orientation, is easy to clean and has no effect on galvanizing, the above introduces the relevant contents about the maintenance and maintenance of the high-frequency welded pipe unit. I hope the above contents are helpful to everyone.
High frequency welded pipe machine
Latest News
Contact Us
Tel :+86-514-87736047
Phone :+86-15062802588
E-mail : market@nanyangmill.com
Address : Yangshou industry park,Hanjiang District, Yangzhou City, Jiangsu Province, China
This website already supports IPV4 / IPV6 bidirectional access